DSpace@TEDU

Browsing Elektonik-Elektronik Mühendisliği by Author "Yazgan, Erdem"

Browsing Elektonik-Elektronik Mühendisliği by Author "Yazgan, Erdem"

Sort by: Order: Results:

  • Turgut, Goksen; Yazgan, Erdem (IEEE, 345 E 47TH ST, NEW YORK, NY 10017 USA, 2017)
    In this study the equivalent paraboloid model is formulated and applied for dual asymmetric antennas that can give the same scattered fields as in dual symmetric antenna systems. This type of modeling leads to the application ...
  • Turgut, Goksen; Yazgan, Erdem (GAZI UNIV, FAC ENGINEERING ARCHITECTURE, BAYAR BULVARI, MALTEPE, ANKARA, 06570, TURKEY, 2019)
    Off-focus fed reflector antennas are preferred to prevent loss due to aperture blockage effect of secondary reflector and feed in the reflector antenna system. For this reason, it is important to calculate the radiation ...
  • Demirel, Kaan; Yazgan, Erdem; Demir, Simsek; Akin, Tayfun (SPIE-SOC PHOTO-OPTICAL INSTRUMENTATION ENGINEERS, 1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98225 USA, 2015)
    A new cantilever type radio frequency microelectromechanical systems (RF MEMS) shunt capacitive switch design and fabrication is presented. The mechanical, electromechanical, and electromagnetic designs are carried out to ...
  • Yigit, Yarkin; Yazgan, Erdem (IEEE, 345 E 47TH ST, NEW YORK, NY 10017 USA, 2015)
    Development of microwave technologies (especially GSM, Wi-Fi and LTE) and UHF receivers (tactical and cognitive radios) offer us realization of very compact and high performance tunable filters. In this paper, narrow band ...
  • Yazgan, Erdem; Ekici, Saim (Taylor & Franchis INC,530 Walnut Street, Ste 850,Philadelphia, PA, 19106 USA, 2020-12)
    The aim of this work is to analyze the effect of tuning screws located at the cross iris of a dual-mode vacuum filled cylindrical waveguide filter. Dual-mode waveguide filters with and without cross iris screws are designed ...
  • Demirel, Kaan; Yazgan, Erdem; Demir, Simsek; Akin, Tayfun (SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2017)
    Design and fabrication of a folded leg Ka-band RF micro electro mechanical systems (RF MEMS) is presented. The mechanical design is carried out to observe minimum permanent deformation on the MEMS bridge after our in-house ...
  • Yazgan, Erdem; Arican, Galip Orkun; Akcam, Nursel (WILEY, 111 RIVER ST, HOBOKEN 07030-5774, NJ USA, 2021-02)
    This article presents a Ku-band Low Noise Amplifier (LNA) Monolithic Microwave Integrated Circuit (MMIC) and RF front-end module for space applications. LNA MMIC was developed with utilizing 0.07 mu m GaAs m-HEMT process. ...
  • Yazgan, Erdem; Akçam, Nursel; Arican, Galip Orkun (Institute of Electrical and Electronics Engineers Inc., 2019)
    This paper is presents, a Ku-band MMIC Low Noise Amplifier (LNA) design for commercial satellite payload. In this paper, MMIC design topology and Electromagnetic (EM) simulation results are presented. A two stage MMIC LNA ...
  • Demirel, Kaan; Yazgan, Erdem; Demir, Simsek; Akin, Tayfun (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 445 HOES LANE, PISCATAWAY, NJ 08855-4141 USA, 2016)
    In this paper, the design and fabrication of a new radio frequency (RF) microelectromechanical system (MEMS) switch structure is presented. This RF MEMS switch is developed to get the minimum permanent deformation on the ...
  • Ozturk, Faruk; Yazgan, Erdem (IEEE, 345 E 47TH ST, NEW YORK, NY 10017 USA, 2016)
    This paper presents the dual frequency and dual polorized microstrip antenna which comply with the requirements of the wireless local area network (WLAN). By using inclined aperture, single feed with dual frequency and ...

Search DSpace


Browse

My Account